The Aspinall Class 5 2-4-2T locomotives were introduced to the Lancashire & Yorkshire Railway from 1889. Built at the company’s Horwich works, the locos were used for passenger traffic, mainly commuter work, around the Manchester area for their entire working lives.
Various modifications and upgrades were done to the class over their lives. Boilers were improved, the bunkers extended for some lots, and some were fitted with apparatus that let them work as pull-and-push engines on trains. This was a system that let the driver operate the main controls remotely from a specially-designed cab at the end of the train, and avoided the need to run the loco round its train at terminus stations.
The Class 5s, reclassified as 2P when the L&Y was absorbed into the LMS in 1924, worked on until the 1950s. A few of the class survived into the 1960s, and one has been preserved in the National Collection and can be seen at the National Railway Museum in York.
The model was built as a commission. It is to a constant 1/43rd scale, 7mm to one foot, and features fully working inside motion within the frames. The basic kit was good, but needed some help in various areas. The finished model is shown in the LMS passenger livery that was used from about 1926 to 1945 or so.
If you’re a regular reader, you will know I am a professional modelmaker. I take commissions to build railway subjects in the main. Once the current crop of loco builds are through the works, I shall be concentrating on passenger and non-passenger rolling stock, as I find building locos is a bit of a chore and doesn’t give the level of satisfaction a good coach build does.