Tag Archives: mend and make do

It ain’t pretty…

Img_4109

…but it works.

The ongoing saga of my ancient laser printer entered a new chapter today. The network card has been squiffy for a while, essentially randomly disconnecting itself whenever it felt like it. 

Fed up with marching to and fro, cajoling and applying percussive maintenance, I decided to get to the bottom of the problem. I reasoned the issue was with the RJ-45 connector alone, and I looked at the possibility of replacing the component.

That proved impossible, and another repair also looked unlikely, namely tweaking the little sprung contacts. After about an hour of further investigation, it became apparent that once connection was made, any movement of the printer—even just the movement made when the print engine kicked in—was causing the cable connector to shift micrometres and disconnecting.

In desperation, and not wishing to buy another used JetDirect card which may end up with the same “fault” I resorted to wedging the connector in the socket with folded bits of paper. This survived the “thump and bash” test to my satisfaction.

As I said, it ain’t pretty, but it works. Old Faithful lives to fight yet another day.

Related: Hello, old friend! / Farewell, old friend